The LCR-614 handheld LCR meter features a 10KHz testing frequency for more accurate component measurements. - Supports measurement of inductance, capacitance, and resistance - Series/parallel measurement modes - Four selectable measurement frequencies - High accuracy of ±0.25% - Displays multiple data including quality factor, loss, and phase angle
 
Product Introduction
The handheld LCR-614 has a detection frequency of 10KHz which can measure the value of the component more accurately.
Measurement Specification
Display Digits : 39,999 digits
Test Signal : 100 / 120 / 1K / 10K Hz
Capacitance Measurement : 0.01p ~ 20.000m F
Inductance Measurement : 0.01μ ~ 1000.0 H
Resistance Measurement : 0.0001 ~ 10.000M Ω
Accuracy : Max ±0.25%
Test Voltage : 0.6V rms
Detection Rate : ４times／Sec. or 1.5 times /Sec.
Signal source output impedance : 100 Ω
Product Features
Calibration Function : Open / short
Backlit Display :
Series and Parallel Equivalent modes :
Loss Measurement (Ｄ) : ４digits display
Quality Factor (Ｑ) : ４digits display
Phase angle (θ) : ±180.0°
Tolerance Mode : 1%、5%、10%、20%
Auto Shut-off : 5 mins、15 mins、30 mins、60 mins 、OFF
Button Lock :
Data Transfer : USB
Product Information
Working Environment : 5~35°C / lower than 75%RH without dew。
Storage Environment : 0~50 °C / lower than 75%RH without dew。
Elevation Limitation : Lower than 1,000 meters
Power Supply : AC:110V 60Hz / 9V Battery
Dimension : 96 x 193 x 47 mm
Weight : 374g
Accessory : SMD test clip, USB transmission line, connector socket, CD, manual