• Test frequency range: 20Hz~200kHz, with a resolution of 15,025 steps • Basic accuracy: 0.05% • 201-point data table scanning function • DCR testing function, resolution of 10μΩ • Ls-Rd/Lp-Rd function (L, Rd displayed simultaneously) • Voltage and current monitoring with automatic potential adjustment • USB flash drive storage support • RS232, USB, HANDLER interfaces
 
Product Introduction
Compared with LCR-2100, LCR-2200 not only has a higher detection signal frequency, but also supports more frequency nodes, which can accurately measure the value of high-frequency capacitance or inductance. ■ Test frequency: 20Hz~200kHz, resolution: 15,025 steps ■ Basic accuracy: 0.05% ■ 201 point row data table scanning function ■ DCR test function, resolution 10uΩ ■ Ls-Rd/Lp-Rd function (L, Rd are displayed at the same time) ■ Voltage and current monitoring and automatic potential adjustment function ■ Support USB flash drive storage ■ RS232, USB, HANDLER interface
Measurement Specification
Display Screen : 4.3 TFT
Display Digits : 999,999
Test Signal : 200KHz 15,025 point
Capacity measurement : 0.00001p ~ 9.99999 F
Inductance measurement : 0.00001μ ~ 99.9999k H
Resistance measurement : 0.00001 ~ 99.9999M Ω
Conductivity measurement : 0.00001μ ~ 99.9999 S
Voltage signal output : standard：5m ~ 2 V RMS / Constant：10m ~ 5 V RMS
Current signal output : standard：5Oμ ~ 100m A RMS / Constant：100μ ~ 50m A RMS
Voltage signal input : standard：5m ~ 2 V RMS / Constant：0.01m ~ 5m V RMS
Current signal input : standard：5Oμ ~ 20m A RMS / Constant：0.001μ ~ 50μ A RMS
Test speed : fast: 12.5ms / Medium: 83 ms / slow: 167 ms
RDC test voltage : 1V
Signal source output impedance : 30Ω、100Ω
Product Features
Language : Chinese / English
Series and parallel equivalent modes :
Loss measurement (D) :
Phase angle measurement (θ) :
Quality factor (Q) :
Test cable length : 1 meter
Calibration: open circuit, short circuit, load :
Measurement method selection : automatic / manual
Trigger mode : INT、MAN、EXT、BUS
Trigger delay : 0~999 sec.
Button lock :
Simultaneous measurement : L-RDC
Data record :
Product Information
Working Environment : 0~40°C / lower than 75%RH without dew。
Storage Environment : 5~40°C / lower than 85%RH without dew。
Warm-up time : Recommended more than 15 minutes
Power Specifications : 110~200V ; 50/60
Power consumption : Approx. 80VA
Dimension : 235 x 105 x 360 mm
Weight : 3600g
Accessory : Transmission line, Disc, manual