The CA-600 current clamp converts measured current values into voltage, easily connecting to multimeters or other instruments. - Measurement range: 0~600A - Jaw opening: 30mm - Signal output: 1 mV / 1A - Accuracy: ±3.0% (50~400Hz) - Frequency range: 50~400 Hz - Easy connection to various measuring instruments
Product Introduction
The CA-600 current hook can convert the measured current value into a voltage and connect it to an electric meter or other equipment. The length of the cable for both models, CA-60 and CA-600, is curled wire 2.63 Feet (80 cm ) and extension are able to 4.3 Foot( 130 cm ) approx.
Measurement Specification
Measuring Range : 0~600A
Clamp Caliber : 30mm
Signal Output : 1 mV / 1A
DC Accurary : ±(2% +2A)
AC Accurary : ±3.0% (50~400Hz)
Frequency Response : 50~400 Hz
Product Features
Reset button :
input impedance : 1MΩ
Double Hall Sensor :
Product Information
Working Environment : 0~40°C / 30~80%RH without dew
Storage Environment : -10~50°C / 35~70%RH without dew
Elevation Limitation : Lower than 1,000 meters
Power Supply : 9v Battery x1
Safety Conformed : IEC 1010-1，IEC 1010-2-032，UL，CE
Dimension : 178 x 70 x 33 mm
Accessory : Battery、 Manual