The CA-1000D current clamp part supports AC and DC current measurement, can convert current values to voltage output, and connects to a digital multimeter or oscilloscope. Input impedance is 1MΩ, measurement range is up to 200A / 1000A, jaw opening is 57mm, signal output is 1mV / 1A, accuracy is ±(1.5%~3.5%) +3A, frequency range is 50~400 Hz.
Product Introduction
The CA-1000D clamp transmitter can convert the measured current value into a voltage and connect it to an electric meter or other equipment.
Measurement Specification
Measuring Range : 200A / 1000A
Clamp Caliber : 57mm
Signal Output : 1mV / 1A
DC Accurary : ±(1.5%~3.5%) +3A
AC Accurary : ±(1.5%~3.5%) +3A
Frequency Response : 50~400 Hz
Product Features
Reset button :
input impedance : 1MΩ
Double Hall Sensor :
Product Information
Working Environment : 0~40°C / 30~80%RH without dew
Storage Environment : -10~50°C / 35~70%RH without dew
Elevation Limitation : Lower than 1,000 meters
Safety Conformed : IEC 1010-1，IEC 1010-2-032，UL，CE
Power Supply : DC 9V Battery
Dimension : 244 x 100 x 40 mm
Weight :
Accessory : Battery、 Manual